Skip to content
Pool water level being tested for leaks

Pool leak detection and repair.

Pool leak detection Dubai starts by proving there is a leak at all — in a Dubai summer, evaporation alone accounts for a surprising amount of water loss.

Pools · Diagnostics

Evaporation or leak — establish that first

Owners regularly call about a pool losing water that turns out to be evaporating normally. A 24-hour bucket test settles it: a bucket of pool water on the steps loses water at the evaporation rate, and any additional drop in the pool itself is a genuine leak.

Once a leak is confirmed, the search is systematic — isolate and pressure-test the suction and return lines, inspect skimmer throats, returns and light niches, then examine the shell. Digging or breaking anything before that sequence is guesswork.

Bucket test set up on pool steps

What leak detection covers

Diagnosis, then a priced repair.

Bucket test

Establishing whether loss exceeds normal evaporation before any invasive work.

Line pressure testing

Isolating suction and return lines and pressurising them to find breaks in buried pipework.

Fitting inspection

Skimmer throats, returns, main drains and light niches — the most common leak points in older pools.

Shell inspection

Checking for structural cracks, spalling and failed junctions in the concrete.

Dye testing

Confirming suspected points precisely before committing to a repair.

Pipework repair

Excavating and replacing failed sections, or rerouting where the original run is unserviceable.

Structural repair

Crack repair, reinforcement treatment and localised re-tanking.

Written findings

A report of what was tested, what was found and what the repair involves.

Dubai villa pool in summer sun

Water loss in Dubai pools

High evaporation makes diagnosis harder than in cooler climates.

Summer evaporation

Loss of a significant amount daily can be entirely normal in peak summer, especially in uncovered, windy locations.

Ground conditions

Leaks into sandy ground leave little visible evidence, so testing rather than observation finds them.

Corroded fittings

Older skimmers, returns and niches degrade in hard, chemically treated water and are frequent culprits.

Cost of ignoring it

Beyond water and chemicals, a persistent leak undermines surrounding paving and can wash out ground around the shell.

Before and after.

Drag to compare · placeholder pair until project photography is supplied
BEFORE — dropping water level, wet ground
AFTER — repaired and holding level
Before After

How diagnosis runs

01

Bucket test

Run over 24 hours to separate evaporation from a real leak.

02

Line testing

Suction and return lines isolated and pressure tested.

03

Fitting and shell inspection

Skimmers, returns, niches and shell examined, with dye testing where needed.

04

Findings and quotation

A written result and a priced repair scope.

05

Repair and retest

Repair carried out and the pool retested to confirm it holds.

Before you call anyone, run a 24-hour bucket test — we will tell you how.

Who this is for

Pools losing water or with suspicious wet ground nearby.

Pools needing frequent top-up
Wet or sinking ground beside the pool
Rising water bills with no other cause
Buyers inspecting an inherited pool
Pools with air in the pump basket
Owners before committing to a retile
Part of

Part of our pool renovation scope — diagnosis first, then structure, finishes and plant.

Pool renovation →

Pool leak questions.

Pool holding level at dusk

Find the leak.

WhatsApp us how much water you are losing per day and we will advise the next step.

Free site visit — leak detection
Photos of the property sent on WhatsApp usually get a faster, more accurate response than the form.
Call WhatsApp Get Quote